Clear 3M Dual Lock Reclosable Fastener 250type 3M SJ3560 with 25mm x 45.7m
3M™ Dual Lock™ Reclosable Fasteners are positive locking, hidden fasteners designed for use in a variety of attachment solutions. They consist of continuous strips of polyolefin stems with a mushroom shaped top protruding up from the backing. When snapped together the mushroom shaped caps interlock producing a strong reliable Fastener.
The standard Dual Lock fasteners are available in three different stem densities (170, 250 and 400) referring to the approximate number of stems per square inch. (26, 39, 62 stems per square centimeter) By inter-locking different stem density combinations you can create the strength that suits your application; more total stems give higher strength. The Dual Lock Reclosable fasteners can be mated in the following combinations of increasing closure strength: Type 170 to Type 250, Type 170 to Type 400, Type 250 to Type 250 and Type 250 to Type 400. We do not recommend using the Type 170 to 170 because it does not have enough strength for a good connection. We do not recommend using the Type 400 to 400 because it is too strong and may cause stems and heads to rip out rendering the fastener no longer reclosable.
The Dual Lock Low Profile has one stem density of approximately 705 stems per square inch and they interlock to themselves. The low profile products are not intended to mate to the standard size Dual Lock.
There are a variety of pressure sensitive adhesives available with Dual Lock to cover most application needs. The pressure sensitive adhesive makes the Dual Lock easy to use, simply remove the liner, place the Dual Lock and apply firm consistent pressure to assure good contact with the substrate you are adhering. We also offer non-adhesive backed Dual Lock for applications where the PSA does not meet your needs.
Features
•Easy Alignment: Dual Lock fasteners engage in any direction or position. The mushroom stems slide into position until they are engaged by snapping together applying firm pressure, this eliminates concerns about misalignment or spontaneous engagement.
•Positive Locking: Dual Lock fasteners engage/fasten with an audible snap and detectable movement assuring complete and secure closure.
•Reclosability: Dual Lock fasteners can be opened and closed for multiple closure applications (high cycle life).
•Blind Attachment: Dual Lock fasteners can be attached on the backside of substrate (i.e. trim piece) where it will not interrupt the show surface.
•Rattle-Free: Dual Lock fasteners will not rattle loose.
•Ease of Assembly: Dual Lock fasteners can be used to attach components before they enter the final assembly plant, reducing the number of parts and the assembly time. No tools are required.
•Adjustable Strength: By selecting different combinations of the various stem densities of the Dual Lock the fastener can be designed to meet the strength needs of the designer.
•Product Forms: Dual Lock fasteners come in a variety of forms: Backed with Pressure Sensitive adhesive, Non-woven, Rigid backed, Die Cut Shapes, and low profile.
•Attachment Methods: The wide varieties of Dual Lock fasteners allow a design engineer flexibility to be able use and attach Dual Lock to just about any substrate or application. Peel and stick pressure sensitive adhesive backed is quick and easy yet strong and secure. Non-woven backed can be used with a variety of adhesive choices such as hot melt, liquid, epoxies, sealants, etc. We have parts that can be attached with a screw or rivet; rigid and plain backed for developing your own special device.
Applications:
3M Dual Lock has three types density, which are type 170, type 250 and type 400.
Type 170 is the lower density mushroom stems which need to use together with type 400 while application.
Type 250 is medium density which can be used independently, and it can be easily to peel off and reclosable for thousands of times.
Type 400 is high density which is very hard to peel off , it's usually used for permanently fixing or used together with type 170 or type 250 to provide different strength combinations.
3M dual lock series is convenient and faster to use compare to traditional fastening methods, such as screws, nuts or bolts. It is designed to deliver a durable, reclosable fastening solution (which can be opened and closed multiple times) which bonds to a variety of substrates including metals and plastics such as acrylics, polycarbonate and ABS,etc.
They are very suited for many indoor and outdoor applications where a high strength and versatile reclosable fastening system is required such as elevator interior module fixing, nameplate fixing, electronic module fixing, etc.
Automotive interior components fixing
Nameplate/Logo fixing
Home decor items fixing
Office decor/wall decor fixing
Other outdoor or indoor use
Production Workshop
GBS Certificate
Q&A
Q:WHY CHOOSE US? WHAT ARE OUR ADVANTAGES ?
1.Professional adhesive tapes manufacturer for 20+ years.
2.Equipped with various
2.Alibaba assessed Golden Supplier
3.OEM/ODM available
4.Accept small MOQ
5.Free Samples available and best service
6.Good production capability, quick leadtime and fast delivery
Q:What is your payment method?
A:We prefer to T/T,or Paypal Payment.
Q:What is the lead time?
A:As usual, we will complete the delivery within 6-10 days after your order.
Q:Can you make other sizes and packages for this product?
A:Yes, we can make other sizes as your requirement, normally our quotation will contain the common package. If you need your own packages, you'd better advise your requirement ahead of time for an accurate quote.
Q:Will you accept us to visit you?
A:Warmly welcome, we can show you our company and hope for a long time corporation with you.
Q:What certificates you have for your products?
A:We have some patents and ISO9001 and ISO2004 Certification and other certifications like CE,UL,SGS,RoHs, Reach etc.
Audited Supplier 
){kind=link}
){kind=link}